Work in Progress

Unruly Tommies WW2 France 1944, need some help

Posted by Hobbyinovator on 15 Mar 2021, 15:34

Though uneven at different sides.
Imagepublic domain images
Hobbyinovator  
 
Posts: 235
Member since:
28 Dec 2009, 23:19


Posted by Hobbyinovator on 15 Mar 2021, 15:37

As can be seen the shrinkage changes the positioning of the figures a bit. The Stengun magazine of the red cap actually touched the throat of the soldier, now its some mm away from it.
Image
Hobbyinovator  
 
Posts: 235
Member since:
28 Dec 2009, 23:19

Posted by Hobbyinovator on 15 Mar 2021, 15:38

Image
Hobbyinovator  
 
Posts: 235
Member since:
28 Dec 2009, 23:19

Posted by Hobbyinovator on 15 Mar 2021, 15:41

The shrinking maerial puts quiet some pressure on the building, I realize that I should also put some masking tape on the frame.
Image
Hobbyinovator  
 
Posts: 235
Member since:
28 Dec 2009, 23:19

Posted by Hobbyinovator on 15 Mar 2021, 15:43

The gaps are filled with some joinery filler.
Image
Hobbyinovator  
 
Posts: 235
Member since:
28 Dec 2009, 23:19

Posted by Hobbyinovator on 15 Mar 2021, 15:45

I use a hole bottle of Italeris Non toxic Cement for plastics to try to fill in the large cracks.
Image
Hobbyinovator  
 
Posts: 235
Member since:
28 Dec 2009, 23:19

Help keep the forum online!
or become a supporting member

Posted by Hobbyinovator on 15 Mar 2021, 15:47

Image
Hobbyinovator  
 
Posts: 235
Member since:
28 Dec 2009, 23:19

Posted by Hobbyinovator on 15 Mar 2021, 15:49

Large crack devours most of the liquid cement.
Image
Hobbyinovator  
 
Posts: 235
Member since:
28 Dec 2009, 23:19

Posted by Hobbyinovator on 15 Mar 2021, 15:53

Floor of building start to bend, not sure if it's only because to the Das pronto curing or if all the liquid cement that was poured into the large crack has found its way under the floor and is drawing it down?
Image
Hobbyinovator  
 
Posts: 235
Member since:
28 Dec 2009, 23:19

Posted by Hobbyinovator on 15 Mar 2021, 15:56

Starts to look a bit like an accordion.
Image
Hobbyinovator  
 
Posts: 235
Member since:
28 Dec 2009, 23:19

Posted by Hobbyinovator on 15 Mar 2021, 16:02

Some ground panting, using Citadel technical paint, mix of Stirland Battlemire, Armageddon dunes and Stirland mud.
Image
Hobbyinovator  
 
Posts: 235
Member since:
28 Dec 2009, 23:19

Posted by Hobbyinovator on 15 Mar 2021, 16:06

Had to cover up the bending floor with some Citadel Technical Astrogranite Debris mixed with rabble from Gale force nine.
Image
Hobbyinovator  
 
Posts: 235
Member since:
28 Dec 2009, 23:19

Posted by Hobbyinovator on 15 Mar 2021, 16:28

Another pic of the building and floor.
Image
Hobbyinovator  
 
Posts: 235
Member since:
28 Dec 2009, 23:19

Posted by Hobbyinovator on 15 Mar 2021, 16:30

Lets try some water effects, acrylic Vallejo Water Texture mixed with some brown paint.
Image
Hobbyinovator  
 
Posts: 235
Member since:
28 Dec 2009, 23:19

Posted by Hobbyinovator on 15 Mar 2021, 16:32

More water. I work very slowly because I'm not used to so much of the material and methods.
Image
Hobbyinovator  
 
Posts: 235
Member since:
28 Dec 2009, 23:19

Posted by Hobbyinovator on 15 Mar 2021, 16:35

The first attempt wasn't to impressing, looks like I can't rely on gravity alone, and have to sacrifice some old worn out brush to spread the water effect more evenly.
Image
Hobbyinovator  
 
Posts: 235
Member since:
28 Dec 2009, 23:19

Help keep the forum online!
or become a supporting member

Posted by Hobbyinovator on 15 Mar 2021, 16:38

Wide pic of the diorama, more puddles and having sacrificed some brushes.
Image
Hobbyinovator  
 
Posts: 235
Member since:
28 Dec 2009, 23:19

Posted by Hobbyinovator on 15 Mar 2021, 16:39

Vehicles attached.
Image
Hobbyinovator  
 
Posts: 235
Member since:
28 Dec 2009, 23:19

Posted by Hobbyinovator on 15 Mar 2021, 16:41

Diorama cleaned up and masking tape removed.
Image
Hobbyinovator  
 
Posts: 235
Member since:
28 Dec 2009, 23:19

Posted by Bluefalchion on 15 Mar 2021, 17:40

Wow there are a lot of challenges with this project. If it were mine, and I saw those floor tiles starting to warp, I may have thrown up my hands.

Instead, you stuck with it. And it is starting to look pretty good. Convincing muddy look. It is coming along.
User avatar
Bluefalchion  United States of America
 
Posts: 3575
Member since:
23 Dec 2010, 07:57

Previous pageNext page

Return to Work in Progress